EFM8BB1LCK

MSRP $6.25

EFM8BB1 Low Cost 8-bit MCU Starter Kit

The EFM8BB1 Low-Cost Kit is an easier to use yet powerful development starting point. It contains an integrated debugger and a simple USB micro connection to allow rapid prototyping. The board is fully supported in Simplicity Studio including code examples for every peripheral and demos to take advantage of the onboard button and LED. The kit also offers a free unlimited Keil license for its PK51 developer’s kit. Simply plug the board into the host PC with Simplicity Studio installed and it can be flashed, debugged, and more!

MSRP $6.25

 

Kit Contents

  • 1 x EFM8 BB1 Low Cost Board (EFM8BB1LCB)
  • 1 x EFM8 quick start card
  • Free Keil compiler license, no code limit
  • Free IDE and toolset with Simplicity Studio

Kit Features

  • On board USB to C2 Debugger
  • EFM8BB10F8G-A-QSOP24
  • 1 x LED
  • 1 x user button
  • 1 x reset button
  • Breakout headers for every pin
  • 20 pin connector for expansion cards, example BGX
  • SOT-223 voltage regulator footprint for 3.3V rail (LM317 compatible)
  • Solder jumpers for advanced debugging and developing options

Simplicity Studio Features

  • Energy Profiler
  • Configurator
  • Software examples for every peripheral
  • Software demos using LED, button, and UART
  • Setting breakpoints with register and variable values available to view

Step 1: Download and Install Simplicity Studio

Get up and running quickly with precompiled demos, application notes, and examples. Use advanced tools including energy profiling to optimize your MCU application. Choose your software package below.

Full Feature Simplicity Studio (select this if you plan to use other technologies from Silicon Labs)

Standalone 8-bit MCU Simplicity Studio (select this if you only plan to use 8-bit MCUs from Silicon Labs)

Step 2: Run Demos

Demos are a quick and easy way to evaluate a device without compiling or debugging code.

Follow these easy steps:

1. Plug kit in with USB; Use the port labeled DBG

2. Open Simplicity Studio

3. Select Demos (see screeshot)

Status
Expansion Boards Select Columns
Select Columns
Expansion Boards Description
The Isolated RS232/RS485 Evaluation Kit is a demonstration and evaluation platform for creating Isolated RS232 and RS485 solutions. It can be used in conjunction with EFM32 and EFM8 MCU Stater Kits (STKs). It simplifies the process of creating an isolated RS solution by offering an already built and functioning platform. The board schematics are available and there are examples that can be run on the MCU STKs to communicate via isolated RS232 or RS485. The board contains two isolators, an RS232/485 transceiver, a 20-pin breakout header for easy connection, many headers for debugging and evaluation, male DB9 port, and screw terminals for RS485.

Sort A -> Z
Sort Z -> A

Filter by values...

Knowledge Base Articles

Browse our knowledge base articles for information about specific products.

View Knowledge Base

User Forums

Browse technical questions, share your ideas, and learn more about our latest solutions.

Search the forums

Still need help?

Contact technical support or review a case.

Request Support
Close
Loading Results